show blocks helper

filter by price

    Not possible. Enter options ranges in the plugin settings -> tab Structure -> Search by price -> additional options

Showing all 39 results

IMSHO25 Samco Top & Bottom Radiator Hose Kit WRX / STI 01-07

113.80

IMSHO25  Samco Top & Bottom Radiator Hose Kit WRX / STI 01-07

Kit contains the following parts:
  • 1 Upper Radiator Hose
  • 1 Lower Radiator Hose
  • 1 Stainless Steel Marine Grade Hose Clamp Kit

• Manufactured to meet or exceed the requirements of SAE J20.

• Manufactured under an ISO 9002:2000.

• Produced using a SamTek silicone inner lining, wrapped in a specialist fabric then finished with the finest quality silicone outer layer.

• Produced to OEM dimensions to ensure perfect fit.

 

IMSHO45 Samco Coolant Hose Kit WRX / STI 06-07

262.50

IMSHO45  Samco Coolant Hose Kit WRX / STI 06-07

Kit contains the following parts:
  • 1 Heater Matrix Inlet Hose
  • 1 Heater Matrix Outlet Hose
  • 1 Header Tank To Radiator Hose
  • 1 Header Tank To Radiator Hose
  • 1 Header Tank to Water Crossover Pipe Hose
  • 1 Header Tank To Turbo Hose
  • 3 Oil Cooler Modine Hose
  • 1 Water Pump Hose
  • 1 Water Pump Hose
  • 1 Expansion Tank Overflow Hose
  • 1 Expansion Tank Overflow Hose
  • 1 Stainless Steel Marine grade Hose Clamp Kit

• Manufactured to meet or exceed the requirements of SAE J20.

• Manufactured under an ISO 9002:2000.

• Produced using a SamTek silicone inner lining, wrapped in a specialist fabric then finished with the finest quality silicone outer layer.

• Produced to OEM dimensions to ensure perfect fit.

Placeholder

RA9800L2 MITSUBISHI EVO IV 650HP COMPLETE LEFT FRONT AXLE (1996-1997)

840.00

RA9800L2 MITSUBISHI EVO IV 650HP COMPLETE LEFT FRONT AXLE (1996-1997)

Level 2 Front axle for the Evo IV. The inner and outer CV on this car are made from 4130 from the factory, made of a set of aerospace grade torsional axle bars with special double temper process, tempered and de-stress inner and outer housings.This axle is complete and ready to install.

RCM1073 ACL Race Series Main Bearings

107.80

RCM1073  ACL Race Series Main Bearings

ACL Race Series, a unique combination of design, metallurgy, and engineering come together to deliver what drivers expect from high performance Trimetal engine bearings.
Designed to withstand higher RPM conditions, ACL Race Series Engine Bearings are extremely well respected amongst Subaru Engine builders.High strength overlay plate with reduced thickness for improved fatigue properties. Hardened steel backs on all rod bearings to improve the support of the bearing and assist with bearing retention in the housing

RCM1075 ACL Race Series Big End Bearings

80.25

RCM1075  ACL Race Series Big End Bearings

ACL Race Series, a unique combination of design, metallurgy and engineering come together to deliver what drivers expect from high performance Trimetal engine bearings.Designed to withstand higher RPM conditions, ACL Race Series Engine Bearings are extremely well respected amongst Subaru Engine builders.High strength overlay plate with reduced thickness for improved fatigue properties

RCM1240 Parallel Billet Fuel Rail Pair (UK, USDM & Euro spec models)

250.80

RCM1240  Parallel Billet Fuel Rail Pair (UK, USDM & Euro spec models)

RCM Billet Fuel Rails are the perfect addition to any performance engine Project.

• Manufactured from T6061 aluminium.

• Military grade anodized finish.

• CNC machined aluminium mounting brackets.

• Stainless Steel Male / Male fittings for each rail end (15 mm shoulder to -6 thread).

• X4 M5x12 Cap Head Screws and matching spring washers for securing each bracket to the fuel rail extrusion.

• X4 M8x20 Cap Head Screws and matching spring washers for securing each bracket to the inlet manifold.

• X4 Nitrile Rubber O-Rings to seal each fuel rail end to its given fitting.

 

RCM132 Arrow 79mm Billet Crankshaft

2,884.45

RCM132  Arrow 79mm Billet Crankshaft

Engineering precision detailed cranks begins with only the highest quality materials and a flexible batch manufacturing process. Arrow Precision works to exacting standards creating a Subaru crankshaft reverse engineered to stunning perfection.

RCM133 Arrow 75mm Billet Crankshaft

2,884.45

RCM133  Arrow 75mm Billet Crankshaft

Engineering precision detailed cranks begins with only the highest quality materials and a flexible batch manufacturing process. Arrow Precision works to exacting standards creating a Subaru crankshaft reverse engineered to stunning perfection.

RCM1540 Extreme 11 mm Cylinder Head Stud Kit

413.80

RCM1540  Extreme 11 mm Cylinder Head Stud Kit

• Cylinder head studs manufactured using Aircraft Grade Steel.
• Cylinder head stud thread pitch (Block End): M11X1.25.
• Cylinder head stud thread pitch (Cylinder Head end): M11X1.25.
• Cylinder head stud length: 197 mm.

• Kits comprises of:

• X12 Extreme studs.
• X12 Heat treated nuts.
• X12 Heat treated washers.
• X1 Sachet of moly grease.
• X1 Fitting instruction guide.

RCM1627 Uprated V5+ Inlet Valve Set

200.20

RCM1627  Uprated V5+ Inlet Valve Set

Uprated Inlet Valve for V5+ Heads

  • Head Diameter – 36.00 mm (std)
  • Stem Diameter – 5.96 mm
  • Length – 104.35 mm (std)
  • Material – Black Nitrided
  • Valve Type – Intake

 

 

RCM1628 Uprated Version 5+ Exhaust Valve Set

300.50

RCM1628  Uprated Version 5+ Exhaust Valve Set

Uprated Exhaust Valve set for V5+ Heads

  • Head Diameter – 32.00 mm (std)
  • Stem Diameter – 5.96 mm
  • Length – 104.7 mm (std)
  • Material – Inconel
  • Valve Type – Exhaust

 

 

RCM1630 Exhaust Valve Set Uprated Version 1-4

300.50

RCM1630  Exhaust Valve Set Uprated Version 1-4

Uprated Exhaust Valve set, for V1 – V4 Heads

  • Head Diameter – 32.00 mm (std)
  • Stem Diameter – 5.96 mm
  • Length – 106.2 mm (std)
  • Material – Inconel
  • Valve Type – Exhaust

 

RCM1635 High Performance 11 mm Cylinder Head Stud Kit

250.80

RCM1635  High Performance 11 mm Cylinder Head Stud Kit

The RCM 11 mm Performance Head Stud Kit is highly recommended for any new or rebuilt engine producing up to or around 350bhp.

• Cylinder head studs manufactured using Aircraft Grade S99 Steel.
• Cylinder head stud thread pitch (Block): M11X1.25.
• Cylinder head stud thread pitch (Cylinder Head): M11X1.25.
• Cylinder head stud length: 197 mm.

 

• Kits comprises of:
  • X12 Performance studs.
  • X12 Heat treated nuts.
  • X12 Heat treated washers.
  • X1 Sachet of Moly Grease.
  • X1 Fitting Instruction Guide.

RCM2232 Omega Piston Set – JDM STI 2003+ (V9+) EJ20

751.20

RCM2232  Omega Piston Set – JDM STI 2003+ (V9+) EJ20

• Exact replacement for your O.E piston so as not to effect compression.

• Forged from 2618A Aerospace Alloy for the ultimate strength.

• Weighed and batched to within 0.5 grams for the perfect balance.

• Manufactured by Omega, world class leaders within piston design and manufacture.

• Complete kit, supplied with new piston ring set, gudgeon pins, and circlips.

RCM2244 Omega Piston Set – Group N Rally 2001-2014 (V7+) EJ20

813.90

RCM2244  Omega Piston Set – Group N Rally 2001-2014 (V7+) EJ20

• Exact appearance as the genuine piston however engine compression is raised.

• Forged from 2618A Aerospace Alloy for the ultimate strength.

• Weighed and batched to within 0.5 grams for the perfect balance.

• Manufactured by Omega, world class leaders within piston design and manufacture.

• Complete kit, supplied with new piston ring set, gudgeon pins and circlips.

 

 

RCM2428 Oil Sump Pan Baffle Plate

148.20

RCM2428   Oil Sump Pan Baffle Plate

• Helps to reduce the chance of engine failure through oil starvation.

• Advanced Nitrile Rubber flaps specifically developed to not be effected when consistently submerged in oil.

• Manufactured from Laser Cut Stainless Steel.

• Precision Spot Welded.

• Advanced Nitrile Rubber Baffle Flaps.

• Complete with new sump o ring seal.

• Helps to reduce the chance of engine failure through oil starvation.

 

RCM2489 6 Speed Lightweight Flywheel Assembly

344.90

RCM2489  6 Speed Lightweight Flywheel Assembly

The RCM 6 Speed Lightweight Flywheel is a single piece steel billet assembly weighing just 7.3 kgs.This represents a saving of almost 2 Kgs over the standard OEM unit. Designed for all 6 speed Impreza’s, this product has been manufactured to the highest standards. RCM flywheels are finished in a ‘blackodised’ coating to protect against corrosion.

RCM2493 Omega Piston Set – High Compression WRX & STI 2006-2013 (V9+) EJ25

815.15

RCM2493  Omega Piston Set – High Compression WRX & STI 2006-2013 (V9+) EJ25

• Increased compression ratio over the standard EJ25 STI pistons.

• Forged from 2618A Aerospace Alloy for the ultimate strength.

• Weighed and batched to within 0.5 grams for the perfect balance.

• Manufactured by Omega, world class leaders within piston design and manufacture.

• Complete kit, supplied with new piston ring set, gudgeon pins and circlips.

RCM2775 RCM400 2.0 L Thick Wall Short Engine

4,759.35

RCM2775   RCM400 2.0 L Thick Wall Short Engine

  • EJ207 2.0 Thick Walled Block Halves
  • RCM / Arrow H Section Con Rod
  • RCM / Omega Pistons
  • 2.0 ltr Nitrided Crankshaft
  • High Performance Main / Big End Bearings

 

RCM2785 RCM500 2.1 L Closed Deck Block Short Engine

6,264.30

RCM2785   RCM500 2.1 L Closed Deck Block Short Engine

2.1 ltr CDB forged short stroker engine.

  • EJ20 Closed Deck Block Halves (re-manufactured)
  • RCM / Arrow H Section Con Rod
  • RCM / Omega Pistons
  • 79 mm 2.5 ltr Nitrided Crankshaft
  • High Performance Main / Big End Bearings
  • RCM 14 mm Stud Conversion
  • RCM Billet Oil Separator and Gudgeon Pin Covers

 

RCM2791 RCM700 2.35 L Closed Deck Block Short Engine

10,653.70

RCM2791  RCM700 2.35 L Closed Deck Block Short Engine

2.35 ltr CDB forged short stroker engine.

  • EJ22 Closed Deck Block Halves (re-manufactured)
  • RCM / Arrow Xtreme H Section Con Rod
  • RCM / Omega Pistons
  • RCM / Arrow Billet 79mm 2.5 ltr Crankshaft
  • High Performance Main / Big End Bearings
  • RCM 14 mm Stud Conversion
  • RCM Billet Oil Separator and Gudgeon Pin Covers

 

RCM2902 14/14 mm Superstud Cylinder Head Stud Kit

501.60

RCM2902  14/14 mm Superstud Cylinder Head Stud Kit

• Cylinder head studs manufactured using “Aircraft Grade S99 High Tensile Steel” to WRC specification.
• Precision rolled threads.
• Cylinder head stud thread pitch (Block End): M14X2.
• Cylinder head stud thread pitch (Cylinder Head end): 9/16 – 18 UNF.
• Cylinder head stud length: 197 mm.

 

Supplied in the kit are:

• x12 RCM 14 mm head studs.
• x12 ARP 9/16″ 8740 Chromoly 12pt nut
• x12 ARP 9/16″ 8740 Chromoly washer
• 1x Sachet of assembly lube and fitting guide for a comprehensive install.

 

RCM2986 TWISTED TURBO UP/DOWNPIPE KIT FOR V-BAND GENII GARRETT TURBOCHARGERS

1,247.85

RCM2986   TWISTED TURBO UP/DOWNPIPE KIT FOR V-BAND GENII GARRETT TURBOCHARGERS

  • For use with the latest GENII Garrett Turbochargers. GTX30 and GTX35 sizes available for 600-900 bhp. NOTE:This kit is equipped with a screamer pipe and does not return the wastegate to the downpipe. MANIFOLD AND WASTEGATE ARE NOT SUPPLIED AS PART OF THIS KIT BUT ARE AVAILABLE SEPARATELY
  • T3 Inlet, V-Band Outlet.
  • Mounting bracket and installation hardware supplied
  • Compatible with RCM 44mm Wastegate
  • Compatible with RCM Unequal and Equal length exhaust manifolds
  • External ‘screamer’ pipe included

 

RCM3006 Powerparts Spec C Profile Camshaft Kit STI V7 – V9

1,003.30

RCM3006   Powerparts Spec C Profile Camshaft Kit STI V7 – V9

Acknowledged as one of the best stock cams used in a factory model and widely utilized in Group N rallying and equally as effective for track day use these cams offer improved engine performance over the camshafts installed in the non-Spec C models.

RCM3049 RHD Track Attack Oil Catch Tank Kit 2001-2007 TWIN SCROLL

275.90

RCM3049  RHD Track Attack Oil Catch Tank Kit 2001-2007 TWIN SCROLL

• All RCM Catch tanks are produced with a specific bracket to allow fitment on to the Impreza chassis rail.

• Each kit is supplied with a -8 Drain back hose manufactured using two -8 AN 90 degree alloy fittings connected with -8 metre length of stainless steel braided, nitrile inner rubber hose.

• A special adapter found in each kit replaces the oil sump pan drain plug to allow connection for the oil drain return pipe.

• Lengths of oil breather hose are supplied pre-cut to allow each of the three breather vents to be connected directly to the tank.

• Silicone blanks found in the kit are supplied to cover the old breather inlet ports found on your turbo intake hose.

• A vent pipe is supplied to allow separated damp air to escape back to atmosphere. The hose is designed to exit the tank and run down the transmission tunnel of the car.

 

RCM3050 RHD OIL CATCH TANK KIT 2001-2007

282.20

RCM3050   RHD OIL CATCH TANK KIT 2001-2007

• All RCM Catch tanks are produced with a specific bracket to allow fitment on to the Impreza chassis rail.

• Each kit is supplied with a -8 Drain back hose manufactured using two -8 AN 90 degree alloy fittings connected with -8 metre length of stainless steel braided, nitrile inner rubber hose.

• A special adapter found in each kit replaces the oil sump pan drain plug to allow connection for the oil drain return pipe.

• Lengths of oil breather hose are supplied pre-cut to allow each of the three breather vents to be connected directly to the tank.

• Silicone blanks found in the kit are supplied to cover the old breather inlet ports found on your turbo intake hose.

• A vent pipe is supplied to allow separated damp air to escape back to atmosphere. The hose is designed to exit the tank and run down the transmission tunnel of the car.

RCM906 Double Valve Spring Set

244.55

RCM906  Double Valve Spring Set

Suitable for use on V5+ Cylinder Heads, with the correct spring seats and retainers.Manufactured from chrome silicon vanadium, they are then heat treated, stress relieved and finally shot peened to improve the fatigue life of the spring.

SEN1066 12mm Modified Oil Pump

357.40

SEN1066  12mm Modified Oil Pump

• Improved reliability.

• Increased oil pressure over the standard 10 mm oil pump.

• Modified with a billet, super finish, nitrided replacement plunger.

• 12 mm Internal drive rotor.

• Serial numbered.

• Primed with oil prior to dispatch.

SEN1162 Cosworth Timing Belt Kit 2002MY+ EJ20/22/25

344.90

SEN1162  Cosworth Timing Belt Kit 2002MY+ EJ20/22/25

Contains the following parts:

• X1 Cosworth Subaru Timing Belt . Specifically designed to withstand the stress and heat found in high horsepower .

• X1 Timing Belt Tensioner

• X1 Toothed Idler Bearing

• X2 Smooth Idler Bearings

• X1 Small Smooth Idler Bearing

SPE809 – Con Rods Arrow H-Section Con Rod Set

971.95

SPE809 – Con Rods Arrow H-Section Con Rod Set

  • Significantly stronger than the standard OE conrod.
  • Direct replacement connecting rod for all EJ20 and EJ25 Impreza Turbo models.
  • Double air re-melt steel.
  • Fully machined.
  • Uniform machine peening.
  • Balanced end to end within a gram.
  • 100% magnaflux tested.

 

SPE916 Black Induction Kit WRX / STI 01-07

219.50

SPE916   Black Induction Kit WRX / STI 01-07

Supplied within the kit are the following components:
  • 1 K&N Cone Air Filter
  • 1 RCM Alluminium Fabricated Trumpet
  • 1 Stainless Steel Hose Clamp (for filter to Trumpet Mount)

 

• Filter CFM rate (Cubic Feet / Minute): 647CFM

• Filter length (base to top):165 MM

• Filter supplied pre-oiled.

• Aluminium trumpet retains original inlet neck size: 76 mm

• Manufactured from aluminium spun trumpet with alloy flange adapter to accept the standard air flow meter.

• Retains original air flow meter position.